How to Clean iPhone Microphones and Speakers

How to Clean iPhone Microphones and Speakers

If you’re like most people, you probably use your iPhone to make calls, listen to music, and watch videos. But what happens when your phone’s microphone or speakers start to sound a little bit quiet? One way to fix this problem is to clean your iPhone’s microphone and speakers. In this article, we’ll show you how to clean your iPhone’s microphone and speakers using a few simple tools. We’ll also show you how to troubleshoot common audio problems.

Things to know before cleaning iPhone’s speaker and microphone

It is important to clean your iPhone’s speaker and microphone regularly to ensure proper function. Here are a few things you should know before cleaning your iPhone’s speaker and microphone:

  1. Be sure to turn off your iPhone before cleaning it.
  2. Use a soft, dry cloth to clean the exterior of your iPhone.
  3. Use a cotton swab dipped in rubbing alcohol to clean the speaker and microphone ports.
  4. Be careful not to get any liquid inside the phone.
  5. Allow the phone to dry completely before turning it on again.
  6. If you continue to have problems with the speaker or microphone, take your iPhone to an Apple store for repair.

How to Clean iPhone Microphones and Speakers

Over time, your iPhone’s microphone and speakers can become clogged with dust and other debris. This can cause problems with sound quality and even prevent your phone from making calls or playing music. Fortunately, cleaning these components is a relatively easy task. All you need is a few simple tools and some patience. To take care of your iPhone’s microphone and speakers, you need to open the device. Follow these steps for cleaning up your iPhone.

Tools You Need

Before you begin, make sure that you have all the tools needed for this job. You’ll need:

  1. Small Phillips screwdriver
  2. Flathead screwdriver (or a plastic opening tool)
  3. Tweezers or small needle nose pliers

If you have any other tools that you feel might be useful, such as a can of compressed air, please let us know so we can include them in our post.

Prepare Your Components

It is not mandatory to prepare any of the components for removal, but it will make the process much easier. By organizing the tools properly, you can access them without removing any screws.

As always, ensure that all the components are switched off and disconnected. If you’re using a plastic opening tool, make sure it is fully inserted into the component before proceeding with any of the steps below.

The Process: Cleaning iPhone Speakers

To take care of the iPhone’s microphone and speakers, you need to open the device. This can be done by taking off the back cover. If this is your first time doing so, it may be best to watch our guide on how to open an iPhone 6 or 6 Plus. Once the back cover has been removed, you can see the two main components of the iPhone: the logic board and the battery.

The logic board is where all of your phone’s components are housed. The battery will be located on top of this board, with a small speaker behind it. The battery is used to power the iPhone and can be replaced if it needs to be. The speaker is a small cylinder that is located underneath the battery. It’s also where your phone’s microphone is housed, which we’ll discuss later.

What Not to Do

It’s important to note that when you’re removing the battery from your iPhone, you should not remove it by inserting a screwdriver or other tool into the back of your phone.

Method 2: Get the iPhone speaker and microphone cleaned from Apple

If you’re experiencing problems with your iPhone speaker or microphone, the best solution is to take it to an Apple service center for cleaning. The technicians will be able to clean out any dirt or debris that may be causing the issue, and you should be able to use your phone as usual afterward. Keep in mind that this service will come at a cost, so make sure you’re prepared for that before you go ahead and schedule an appointment.

How to Troubleshoot Common Audio Problems

The microphone and speakers on your iPhone can become clogged with dust, dirt, and debris over time. This can cause audio problems, such as static or a muffled sound. In some cases, the microphone may even stop working completely. If you’re experiencing audio problems with your iPhone, there are a few things you can do to troubleshoot them. First, try cleaning the microphone and speakers with a soft cloth.

How to Troubleshoot Your iPhone Battery Life

Your iPhone’s battery is like the brain of your phone. Without a sufficient charge, it won’t be able to perform its normal functions, including syncing with iTunes and making calls. If your battery is dying quickly, you may want to consider replacing it. You can also try these troubleshooting steps if you’re having problems with your iPhone’s battery life. There are several things that can shorten your iPhone battery’s lifespan, including the following: Not charging your iPhone overnight.


If your device is still having trouble picking up sound or playing audio, you may need to try a more advanced method of cleaning. You can use a toothpick or a needle to dislodge any debris that may be blocking the ports. It is crucial that you avoid damaging anything during the procedure. Finally, if all else fails, you may want to consider taking your device in for repairs. Contact your nearest Apple store for more information.

Ayub Ansary is a technology expert with a deep knowledge of gaming and operating systems. With years of experience and a passion for sharing his knowledge, He is the go-to resource for anyone seeking to improve their skills or learn more about the latest trends and innovations. Follow his posts for valuable insights and tips on everything from system optimization to gaming strategies.